Education
Understanding your Environment is our Business
Educational facilities are are unique environments with special coatings needs. We are familiar with challenges from the abuse of the public to the rigors of industrial strength cleaners, We have experience diagnosing coatings challenges in every environment.
Maintenance managers, painting contractors, and engineers choose PPG High Performance Coatings when performance counts.
PPG High Performance Coatings Systems Guide
Severe Environment
Moderate Environment
Mild Environment
Educational Facilities, Universities, Colleges, Schools, Trade Schools
back
SEVERE ENVIRONMENT
| LOCATIONS: Interior- walls, floors and equipment, machinery, hazardous waste disposal areas, piping, pumps equipment storage, lifts, pits, battery storage areas and equipment Exterior- canopies , pumps, structural steel, tanks, signs, masonry, siding, |
TYPICAL EXPOSURE: Splash, spills or cleaning with strong chemicals, (acids-bases-oxidizing agents-solvents) frequent abrasion, tropical, sub-tropical, or coastal exterior environment |
Substrate: Ferrous Metal, Galvanized Steel, Aluminum
Surface Preparation - All surfaces should be clean, dry and free of grease, oil or other contamination. All surfaces should be prepared in accordance with SSPC-SP2/3 minimum
|
Primer |
Finish |
System Benefits & Features |
| Pitt-Guardâ DTR Epoxy Primer 97-140 Series, or 97-948 Series |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. Scuff sand all new aluminum and galvanized surfaces to remove oxides and stabilizers. |
| Pitt-Guardâ Rapid Coat Epoxy Primer for new construction 95-200 Series |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. Scuff sand all new aluminum and galvanized surfaces to remove oxides and stabilizers |
| Aquaponâ WB Primer 98-46 Series |
Aquaponâ WB Epoxy Finish 98-1 Series |
For interior surfaces where a low odor, chemical resistant, abrasion resistant coating is required - Gloss Finish for maximum cleanability. May be used to upgrade existing systems |
Pitt-Guardâ DTR Epoxy
97-140 Series, or 97-948 Series |
Pitt-Guardâ DTR Epoxy 97-140 Series, or 97-948 Series |
For immersion in a variety of exposures including but not limited to sewage, process water, nonpotable water. Steel Surfaces require SSPC-SP10 Near White Blast Cleaning |
| Pitt-Guardâ DTR Epoxy Primer 97-140 Series, or 97-948 Series |
Aquaponâ WB Epoxy Finish 98-1 Series or Aquaponâ 35 Epoxy Finish 95-1 Series |
For interior surfaces where a chemical resistant, abrasion resistant coating is required - Gloss Finish for maximum cleanability. May be used to upgrade existing systems |
Substrate: Concrete/Masonry
All surfaces should be clean, dry, and free of grease, oil, lattice, or other contamination. Floors require acid etching as minimum surface preparation. Concrete to be lined requires abrasive blasting to achieve 2 mil profile.
|
Primer |
Finish |
System Benefits & Features |
| Pitt-Guardâ DTR Epoxy Primer 97-140 Series, or 97-948 Series |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. on exterior concrete surfaces |
| Aquapon â Epoxy Block Filler 97-685 Series |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. on exterior CMU (Concrete Masonry Unit) surfaces |
| Pitt-Guardâ DTR Epoxy 97-140 Series, or 97-948 Series |
Pitt-Guardâ DTR Epoxy 97-140 Series, or 97-948 Series |
For immersion in a variety of exposures including but not limited to sewage, process water, nonpotable water. Concrete Surfaces require abrasive blast cleaning |
| Aquapon â Epoxy Block Filler 97-685 Series |
Aquaponâ WB Epoxy Finish 98-1 Series or Aquaponâ 35 Epoxy Finish 95-1 Series |
For interior CMU surfaces where a stain , chemical, abrasion resistant coating is required - Gloss Finish for maximum cleanability. |
| Aquaponâ WB Epoxy Finish or Aquaponâ 35 Epoxy Finish |
Aquaponâ WB Epoxy Finish 98-1 Series or Aquaponâ 35 Epoxy Finish 95-1 Series |
For interior floor surfaces or precast concrete surfaces where a chemical resistant, abrasion resistant coating is required - Gloss Finish for maximum cleanability. Aquaponâ WB Epoxy May be used to upgrade existing systems |
Educational Facilities, Universities, Colleges, Schools, Trade Schools
back
MODERATE ENVIRONMENT
|
LOCATIONS: Interior- walls, floors, machinery, piping, pumps, lifts, and equipment Exterior- canopies , pumps, structural steel, tanks, signs, masonry, siding. |
TYPICAL EXPOSURE: Splash, spills or cleaning with mild chemicals and soaps, occasional moderate abrasion, moderate to coastal environment |
Substrate: Ferrous Metal, Galvanized Steel, Aluminum:
Surface Preparation - All surfaces should be clean, dry and free of grease, oil or other contamination. All surfaces should be prepared in accordance with SSPC-SP2/3 minimum .
|
Primer |
Finish |
System Benefits & Features |
| Pitt-Guardâ DTR Epoxy Primer 97-140 Series, or 97-948 Series |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. Scuff sand all new aluminum and galvanized surfaces to remove oxides and stabilizers. |
| Pitt-Guardâ Rapid Coat Epoxy Primer for new construction 95-200 Series |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. Scuff sand all new aluminum and galvanized surfaces to remove oxides and stabilizers |
| Aquaponâ WB Primer 98-46 Series |
Aquaponâ WB Epoxy Finish 98-1 Series |
For interior surfaces where a low odor, chemical resistant, abrasion resistant is required - Gloss Finish for maximum cleanability. May be used to upgrade existing systems |
| Pitt-Techâ Industrial Acrylic Primer 90-712 Series |
Pitt-Tech Industrial Acrylic Enamel 90-374 or 474 Series |
May be used in interior or exterior applications where a low odor chemical resistant is desired. Very good color and gloss retention, fast dry |
| Pitt-Guardâ DTR Epoxy Primer 97-140 Series, or 97-948 Series |
Aquaponâ WB Epoxy Finish 98-1 Series or Aquaponâ 35 Epoxy Finish 95-1 Series |
For interior surfaces where a, chemical resistant, abrasion resistant is required - Gloss Finish for maximum cleanability. May be used to upgrade existing systems |
Substrate: Concrete/Masonry
All surfaces should be clean, dry, and free of grease, oil, lattice, or other contamination. Floors require acid etching as minimum surface preparation.
|
Primer |
Finish |
System Benefits & Features |
| Pitt-Techâ Industrial Acrylic Enamel 90-374 or 474 Series |
Pitt-Tech Industrial Acrylic Enamel 90-374 or 474 Series |
May be used in interior or exterior applications where a low odor chemical resistant is desired and to upgrade existing systems. Very good color and gloss retention, fast dry |
Pitt-Glazeâ Block Filler
16-90 Series |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. on exterior CMU or masonry surfaces |
| Aquaponâ WB Epoxy Finish 98-1 Series or Aquaponâ 35 Epoxy Finish 95-1 Series |
Aquaponâ WB Epoxy Finish 98-1 Series or Aquaponâ 35 Epoxy Finish 95-1 Series |
For interior floor surfaces where a chemical resistant, abrasion resistant is required - Gloss Finish for maximum cleanability. Aquaponâ WB Epoxy may be used to upgrade existing systems |
Educational Facilities, Universities, Colleges, Schools, Trade Schools
back
MILD ENVIRONMENT
| LOCATIONS: Interior- Offices and public areas, equipment, doors and frames, pumps and piping, Exterior- walls, panels, pumps, equipment, structural steel, handrails, windows, signs, etc. |
TYPICAL EXPOSURE: Infrequent, spills or cleaning with mild chemicals and soaps, occasional abrasion, mild, to moderate environment |
Substrate: Ferrous Metal, Galvanized Steel, Aluminum:
Surface Preparation - All surfaces should be clean, dry and free of grease, oil or other contamination. All surfaces should be prepared in accordance with SSPC-SP2/3 minimum
|
Primer |
Finish |
System Benefits & Features |
| PPG Multprimeâ Primer 97-680 Series**
**not for galvanized metal |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. Scuff sand all new aluminum and galvanized surfaces to remove oxides and stabilizers. |
| Pitt-Guard â Rapid Coat Epoxy Primer for new construction 95-200 Series |
Pitthaneâ Ultra Urethane Finish 95-800 Series or Pitthaneâ 35 Urethane Finish 95-850 Series |
Provides maximum color & gloss retention along with excellent corrosion, abrasion, and chemical resistance. Scuff sand all new aluminum and galvanized surfaces to remove oxides and stabilizers |
| PPG Multprimeâ Primer 97-680 Series**
**not for galvanized metal |
Aquaponâ WB Epoxy Finish 98-1 Series or Aquaponâ 35 Epoxy Finish 95-1 Series |
For interior surfaces where a chemical resistant, abrasion resistant is required - Gloss Finish for maximum cleanability. May be used to upgrade existing systems |
| PPG Multprimeâ Primer 97-680 Series**
**not for galvanized metal |
Pitt-Tech Industrial Acrylic Enamel 90-374 or 474 Series |
May be used in interior or exterior applications where a high quality water base finish is desired. Very good color and gloss retention, fast dry |
| PPG Fast Dry 35 Primer 95-900 Series**
**not for galvanized metal |
PPG Fast Dry 35 Enamel 95-900 Series |
May be used in interior or exterior applications where a high quality alkyd finish is desired. Good color and gloss retention, fast dry |
| Pitt-Techâ Industrial Acrylic Enamel 90-374 or 474 Series |
Pitt-Tech Industrial Acrylic Enamel 90-374 or 474 Series |
May be used in interior or exterior applications to upgrade existing systems. Very good color and gloss retention, fast dry |
Substrate: Concrete/CMU/Interior Drywall & Wood Trim:
All surfaces should be clean, dry, and free of grease, oil, lattice, or other contamination. Floors require acid etching as minimum surface preparation.
|
Primer |
Finish |
System Benefits & Features |
| Pitt-Techâ Industrial Acrylic Enamel 90-374 or 474 Series |
Pitt-Tech Industrial Acrylic Enamel 90-374 or 474 Series |
May be used in interior or exterior applications where a low odor durable coating is desired and to upgrade existing systems. Very good color and gloss retention, fast dry, may be used on floors |
Pitt-Glazeâ Block Filler
16-90 Series |
Pitt-Tech Industrial Acrylic Enamel 90-374 or 474 Series |
May be used in interior or exterior applications where a low odor durable coating is desired and to upgrade existing systems. Very good color and gloss retention, fast dry |
| Speedhideâ Sealer 6-2 Series |
Speedhideâ Flat Wall Paint 6-70 Series |
Coating system for interior walls in mild to moderate environments such as rooms, offices and common areas. Readily repaired and touched up. |
| Speedhideâ Enamel Undercoater 6-855 |
Speedhideâ Semi-Gloss Enamel 6-510 Series |
Coating system for interior trim in mild to moderate environments such as rooms, offices and common areas. Readily repaired and touched up. |
| Speedhideâ Sealer 6-2 Series or Speedhideâ Enamel Undercoater 6-855 |
Speedhideâ Eggshell Enamel 6-411 Series |
Coating system for interior walls & trim in mild to moderate environments such as rooms, offices and common areas. Readily repaired and touched up. |
| Pitt-Techâ Industrial Acrylic Enamel 90-374 or 474 Series |
Pitt-Tech Industrial Acrylic Enamel 90-374 or 474 Series |
May be used in interior or exterior applications where a low odor durable coating is desired and to upgrade existing systems. Very good color and gloss retention, fast dry, may be used on floors |
| Pure Performance® Zero VOC Interior Latex Primer 9-2 |
Pure Performance® Zero VOC Interior Latex 9-110 Flat, 9-411 Eggshell, 9-510 Semi-Gloss |
Our Premium low odor, zero VOC interior latex system is formulated with anti microbial properties, which enhances mildew resistance on the dried paint. Ideal for use in any commercial setting where Premium quality paint with minimal odor and the environment are a concern. |
|