New products introduction

The Qualification of CA 7700 to BMS 10-72
Specification：BMS 10-72 Rev. W.
Qualified by ：BMS 10-72 Type VIII

New Product-KS35
Product Name KS35
Product Description Chromate Free Epoxy Knifing Stopper
Key Features KS35 is a low VOC, chromate-free, Epoxy based knifing stopper or direct application to composites and already primed metallic substrates. Unlike polyester stoppers,
KS35 has very good water and Skydrol resistance.
The stopper can be overcoated with epoxy primers,polyurethane primers and primer surfacers
Specifications – Approval AIMS 04-04-030 (IPS 04-04-030-01 )
Aircelle HMRC0095
Specifications – Performance Eurocopter
Catalyst/Hardener/Activator KS35B or KS35B1
Thinner/Reducer -
Pack Size -
Mix Ratio Base KS35A 2 w/w or 1 volume
Activator KS35B 1 w/w or 1 volume or KS35B1 1 w/w or 1 volume
Recommended Schemes -
Product Application Parameters
Surface Preparation Ensure surface is clean and free from any contaminants.
Observe over-coat times from previous coatings
Mixing Measure the 2 components in the correct ratio, then mix together thoroughly until an even coloured smooth paste is obtained.
Viscosity N/A
Induction Time None required
Pot Life 30 minutes at 23°C with KS35B
1H00 at 23°C with KS35B1